After the electric stacker has been in operation for a week, a routine maintenance should be stopped. The efficiency, life and safety of the electric stacker depend on the daily maintenance.

1. Safety rules for maintenance of electric stackers

(1) Adhere to the cleanliness of the maintenance site.

(2) During maintenance, do not bring loose objects or valuables on your body. Attention! When repairing the electrical system of the electric stacker, if the metal contacts the energized electronic components, it will easily form a short circuit or go out. So, please take off your watch, earrings or other accessories.

(3) Before repairing the electric stacker, unplug the power socket and disconnect the power supply.

(4) The key switch of the forklift should be turned off before opening the left and right box covers or the electrical system of the electric stacker.

(5) Before checking the hydraulic system, lower the fork to release the system pressure.

(6) When checking the oil leakage of the car body, please wipe it with paper or cardboard, and do not touch it directly with your hands. So as to avoid injury.

(7) Please note that the oil temperature in the transmission installation or hydraulic system may be high. The electric stacker should be cooled first, and then the gear oil or hydraulic oil should be changed to prevent the high oil temperature from extinguishing.

(8) The hydraulic system of the electric stacker should be filled with new clean oil. Attention! If the hydraulic oil is not clean, it will affect the fine hydraulic components and make the entire hydraulic system lower. If different brands of hydraulic oil are used, it will damage the hydraulic components and affect the performance of the system. Therefore, when adding or changing hydraulic fluids, pay attention to the use of uniform grades.

(9) Please abide by the relevant laws and regulations, maintain the environment, store and discharge oil in accordance with the rules, and do not discharge it into the sewer pipe. (10) When welding the car body, disconnect the battery power supply. Since the welding current may enter the battery during welding, to prevent this kind of situation from happening, please cut off the battery.

(11) When working under the electric stacker, the electric stacker should be supported by the bracket. Warning! Improper support will cause the electric stacker to tip over and injure people. If the electric stacker does not have lifting equipment or supports for maintenance, stop working under the electric stacker.